Stagg EKG Pro Gooseneck Electric Kettle, 0.9 Liter

“However, I don't update the kettle because it doesn't work unless I put my phone on 2.4 gHz. So I'm not overly concerned with future changes, I just wanted to share my use case.”

“I double checked the kettle itself. The firmware seems to have updated but the app says otherwise. So I can only assume this new firmware has messed with something for us all”

“I'm very glad this is being worked on. Is the improvement to heat times compared to the original time or the recently slowed-down time? I wonder what extra tweaks means.”

“Hi Dan, I see that there is a new update posted to address this (1.1.76). Thank you for continuing to look for ways to improve the user experience. You guys are awesome, keep doing what you’re doing 🤘”

“I added the wood option on the lid and handle. Other than that, I never saw anything in spec materials. So maybe at the flow regulator? Aside from that, the boil temp based on altitude is pretty neat.”

“I left it idle for an hour or so and came back, and now it's back to "Your kettle hasn't checked in for a while." But it did download the slow-heating update on its own somehow... just keep waiting maybe?”

“Then you're free to develop the next build without the time constraint knowing that there are lots of users getting increasingly frustrated with the Stagg.”

“I think that you need to hold one of the button (do not remember which one), and then after few seconds it will display the firmware version. I think !!!”

“94C to 96C Kettle always at least half full ~ for heat inertia and to protect the kettle from exposing the heat element to “air” V60 pour overs 230V”

“Is there an alternative method for checking the firmware version directly on the base unit, rather than using the app? I would prefer to avoid connecting the base to the internet to prevent automatic updates for now.”

“After watching this I ran straight to my kitchen to play Wormy on my Stagg EKG... But no matter how many times I flip the F/C switch, it doesn't work! Am I doing something wrong, or do older models not have it...? :(”

“You should calibrate it, it's in the settings menu. I'd suggest even turning off wifi before, so you get the most noise free accurate result.”

“What if you do not update it does it do it on it's own? I don't think mine is connected to the internet and not sure what update everyone is talking about. I have the lattitude set but have not used an app with it does this matter? ty!”

“Damn… just got mine Black Friday. I’m going to run it to see if that’s happening. It has not done that so far…”

“Anyone having problems with the Stagg LED burning out? Kettle heats up but light doesn’t come on at all 😢”

“All you have to do is run the calibration under maintenance and it should return to normal operation”

“I can’t quite tell from the video - can you hear a clicking sound of the heating element cycling off and on when it’s doing this (when it should be on the entire time until it reaches temp)? I had that issue and was able to get a warranty replacement from Fellow.”

“I’ve been using my kettle for 4 yrs with around 80 ppm water and don’t see any calcification”

“Submit a ticket to fellow. If you registered it online, you have a three year warranty”

“It bothered me that it completed a heating cycle and stayed hot for 30 minutes before I needed it. Every time it brings water to temp is wearing slightly on the element and the control board. Doing these things are how I justify spending outside of my means on a high ticket item.”

“thought my ekg was breaking down glad to know they are fixing this”

“The stagg also has a timer and the Plus model has bluetooth so you can turn it on from your phone in the morning if you fill it the night before. Not sure if the others do this, but the Stagg's Hold switch is a manual switch and is always on or off. It doesn't reset when you turn the kettle off.”

“I start believing that it is indeed a software update issue!”